TECHNICAL DATA FOR WB DRY-ERASE COATING – REMARKABLE
| Test Method | Results | |
| Shelf Life | 6 months | |
| Mixing Ratio by Volume A:B | 1:2 | |
| Wet Film Thickness per Coat | 3–5 mils | |
| Dry Film Thickness per Coat | ASTM D-3363 | 1½ – 3 mils |
| Tear Resistance DleC | ASTM D-1004-66 | 270 pli |
| Tensile Strength | ASTM D-412 | 3980 psi |
| Ultimate Elongation | ASTM D-412 | 30% |
| Gloss (60°) | ASTM D-823 | 85 (±5) |
| Volume Solids | ASTM D-2697 | 61% by volume 58% (when cut with 5% water per 1.5 gal kit) |
| VOC | ASTM D 2369-81 | < 50 g/l |
| Pot Life (75±3°F) | 60 minutes | |
| Recoat Time | 7 hrs (min) – 24 hrs (max) | |
| Taber Abrasion | ASTM D-4060-84 | 33.9 mg Loss, C17 Wheel, 1000g Load, 1000 Cycles |
| Impact Resistance | ASTM D-2794-84 | Inch-pounds Direct 160 Reverse 160 |
| Pencil Hardness | ASTM D-3363-84 | 2-H |
| Pendulum Hardness | After 1 Day: 43 Seconds After 7 Days: 168 Seconds |
|
| Mixed Viscosity at 75°F (24°C) 50% RH | 800 cps | |
| Mixed viscosity with 5% water dilution | 520 cps | |
| Weight | A-SIDE: 9.1 lbs/gal B-SIDE: 9.0 lbs/gal |
|
| Flash Point | A-SIDE: <365°F B-SIDE: n/a |
|
| 14 Days Cured | ||
| 4 hrs | 24 hrs | |
| 10% Acetic Acid | No Effect | No Effect |
| 10% Sulfuric Acid | No Effect | No Effect |
| 10% Hydrochloric Acid | No Effect | No Effect |
| 14% Ammonium Hydroxide | No Effect | No Effect |
| 50% Sodium Hydroxide | No Effect | No Effect |
| IPA – Iso-Propyl Alcohol | No Effect | No Effect |
| MEK – Methyl Ethyl Ketone | No Effect | No Effect |
| Deionized (Water) | No Effect | No Effect |
| 10% Betadine | No Effect | No Effect |
| 10% Bleach | No Effect | No Effect |
| Gasoline | No Effect | No Effect |
