ATTN IFMA MEMBERS!
MAXIMIZE YOUR WORKSPACE IMPACT WITH COST-EFFECTIVE DRY-ERASE WALLS
Dry erase painted walls offer Facility Managers an affordable, scalable way to enhance communication, visualization, and space utilization across offices, conference rooms, training labs, and facility hubs. These expansive writing surfaces promote engagement, streamline operations, and support better decision-making without the installation or maintenance overhead of traditional boards.
Take advantage of exclusive bundle pricing on Whiteboard Walls, an affordable way to maximize writeable space across your facility: ReMARKable whiteboard paint kits
-
Whiteboard Paint – 6 Pack 100 Square Foot Kit (White)
Original price was: $2,214.00.$1,845.00Current price is: $1,845.00. Add to cart -
Dry Erase Paint – 6 Pack 100 Square Foot Kit (Clear)
Original price was: $2,124.00.$1,770.00Current price is: $1,770.00. Add to cart -
Whiteboard Paint – 600 Square Foot Kit (White)
$1,480.00 Add to cart -
Whiteboard Paint – 6 Pack 50 Square Foot Kit (White)
Original price was: $1,614.00.$1,345.00Current price is: $1,345.00. Add to cart -
Dry Erase Paint – 6 Pack 50 Square Foot Kit (Clear)
Original price was: $1,554.00.$1,295.00Current price is: $1,295.00. Add to cart -
Whiteboard Paint – 200 Square Foot Kit
$678.00 Add to cart
FACILITIES TEAMS ACROSS INDUSTRIES TURN UNDERUSED SURFACES INTO HIGH-IMPACT DRY-ERASE WORK ZONES.
From Google and Starbucks to Harvard and Yale, leaders in innovation rely on ReMARKable® to make their spaces more collaborative.
Ready to the same?
Order your ReMARKable® kit and start transforming wall that actually work.
Why ReMARKable® for FM's?
- Transform walls, doors, desks and virtually any smooth surface into collaborative spaces.
- One-caot application saves ~50% in labor cost vs. solvent-based coatings.
- At around $2.30/sq ft, ReMARKable® surfaces deliver big savings and better durability than $20+/sq ft whiteboards
- Low VOC, LEED-compliant, glare-resistant finish built to outperform traditional coatings with a 10-year warranty.
- Dedicated U.S.-based support that understands facilities operations with fast advice only a phone call away.
- Superb and easy erase-ability using low odor dry erase markers.
- Available in white or clear so your wall color shows through if you want it to.
- Performance does not deteriorate over time.
- Guaranteed not to yellow, crack, or peel.
ReMARKable® Transformations
Repurpose and Refresh Surfaces Across Your Facility
Revitalize dull walls, outdated whiteboards, doors, desks, or any smooth surface with the ReMARKable® Whiteboard transformation process. See how eay it is to upgrade underused areas into high-value dry-erase zones. Don’t limit the transformation to walls alone! Tables, cabinets, and other flat surfaces are fair game. Boost collaboration, visibility, and productivity acreoss your entire facility.
Refresh an Existing Whiteboard with ReMARKable® Whiteboard Paint
- Clean the surface thoroughly to remove all ink and residue.
- Mask-off adjacent areas with easy-release painter’s tape.
- Apply 2-3 thin coats of ReMARKable® Base Paint. Wait 3-4 hours between coats to ensure proper sealing and adhesion. Use a 1/4″ nap roller for best results on smooth surfaces. Wait at least 24 hours after the final coat.
- Apply one coat of ReMARKable® Whiteboard Paint using a 3/8″ nap microfiber roller. Use a 2″ sponge brush for detailed edge work.
- Remove tape 3-4 hours after application.
- Wait 48-hours before use. Pair with low-odor dry erase markers and a microfiber cloth for easy, clean erasing.
Convert Desks or Work Surfaces into Writable ReMARKable® Zones
- Clean and dry surfaces thoroughly.
- Mask off surrounding areas as needed.
- Apply 2-3 thin coats of ReMARKable® Base Paint. Wait 3-4 hours between coats. Use a 1/4″ nap roller for smooth surfaces. Let final coat dry for at least 24 hours.
- To get the best results, position the surface vertically during application. Lean the desk or table against a wall or support it upright to activate the self-leveling properties.
- Apply one coat of ReMARKable® Whiteboard Paint using a 3/8″ nap microfiber roller. Use a 2″ sponge brush to cut around edges.
- Remove tape 3-4 hours after application.
- Allow 48 hours before using dry erase markers. For best results, use with a microfiber cloth and low-odor markers.
*Refer to Instruction Sheet below for complete application instructions
https://www.remarkablecoating.com/wp-content/uploads/2021/04/ReMARKable_Instructions.pdf
Refresh Whiteboard Walls with ReMARKable®
(For smooth surfaces with no holes or patching required)
- Wipe all ink and residue from the wall.
- Mask surrounding areas as needed.
- Lightly sand the surface with 220 grit sandpaper to scuff and remove any staining.
- Once smooth, clean, and dry, apply one coat of ReMARKable® Whiteboard Paint using a 3/8″ nap microfiber roller. Use a 2″ sponge brush for the edges if needed.
- Remove painter’s tape 3-4 hours after application.
- Wait 48 hours before use. Works best with low-odor dry erase markers and a microfiber closth.
Restore Damaged Whiteboard Walls with ReMARKable®
(For smooth surfaces that require patching before repainting)
- Clean the wall and remove all ink.
- Mask off nearby areas.
- Lightly sand the surface with 220 grit sandpaper to scuff, etch, and remove stains.
- Use paintable patching material to fill holes, dents, or surface damage. Once dry, sand the patched areas smooth.
- Apply a water-based primer over the patched areas to seal them.
- Apply 2 thin coats of ReMARKable® Base Paint, waiting 3-4 hours between coats. Use a 1/4″ nap roller and allow 24 hours for the final coat to dry.
- Apply one coat of ReMARKable® Whiteboard Paint with a 3/8″ nap microfiber roller. Use a 2″ sponge brush for the edges if needed.
- Remove painter’s tape 3-4 hours after application.
- Wait 48 hours before writing. Use low-odor dry erase markers and a microfiber cloth for easy cleanup.
Convert an Old Chalkboard into a ReMARKable® Whiteboard
- Remove all chalk dust and make sure the surface is clean and dry.
- Mask off the surrounding frame or wall areas.
- Apply 2-3 thin coats of ReMARKable® Base Paint, waiting 3-4 hours between coats. This seals the porous surface and creates a smooth base. Use a 1/4″ nap roller for best results. Let the final coat dry for at least 24 hours.
- Apply one coat of ReMARKable® Whiteboard Paint with a 3/8″ nap microfiber roller. Use a 2″ sponge brush for cutting in around the edges.
- Remove painter’s tape 3-4 hours after application.
- Wait 48 hours before writing on the surface. Use low-odor dry erase markers and a microfiber cloth for easy erase.
It only takes five simple steps to convert almost any smooth, painted surface into a high-performance dry-erase workspace. From facility walls and doors to desks, lockers, and equipment enclosures, ReMARKable® turns underutilized surfaces into practical, writable zones without bulky, expensive whiteboard installations.
Choose Your Space
Identify the area where a dry-erase wall would add the most value. Consider high-traffic zones like conference rooms, maintenance hubs, planning areas, or team break spaces.
Measure Up
Order only what you need. ReMARKable® kits come in multiple sizes. Measure the space and decide how much writable surface fits your operations best.
Decide On Your Color
Use white for a classic board look, or use clear to preserve your existing paint color or brand scheme. Clear works over any light-to mid-toned color.
Apply Proper Base Paint
Use ReMARKable®’s recommended Preferred-Base-Paints to prep your surface. White is required under the white kit. Clear kits can go over many colors. Use a 1/4″ nap roller for smooth, even coverage.
Apply ReMARKable® Whiteboard Paint
Apply with a 3/8″ nap microfiber roller after the base coast is fully dry. The smoother the wall, the better the performance. Call us with any prep questions before mixing.
Educational Use Idea Gallary
Surprising Advantages of Whiteboard Paint
There are countless advantages to using ReMARKable whiteboard painted walls as media for expression, instruction, data transfer, and creative thinking, but the following are seven of the most outstanding. Whiteboard Paint's Versatility Our dry erase walls are...
Dream Whiteboard Wall + Smartmarker Contest Ending Soon
The Dream Whiteboard Wall Contest co-sponsored by ReMARKable Whiteboard Paint and Equil Smartmarker is coming to an end on February 1, 2016 at midnight EST. Up until that time, you can register to win this $3100+ value package including 600 square feet of whiteboard...
